Here is how to program the date in the Samsung ER-380. Very simple process:
Setting the Date
The date sequence is Month-Day-Year.
1. Turn the control lock to the PGM position.
2. Enter the date in the format you have selected and press the SUBTOTAL key:
M M D D Y Y @/FOR Subtotal
example
If the date is March 1, 1999, enter:
0 3 0 1 9 9 @/FOR Subtotal
The date you have entered will display and print on the printer:
03-01-1999
Setting the Time
1. Turn the control lock to the PGM position.
2. Enter the hour and minute in military time (24 hour time) and press the @/FOR key:
H H MM @/FOR
Time Setting Example
If the time is 3:25 PM, enter:
1 5 2 5 @/FOR
The time you have entered will display and print on the printer:
15:25
4 comments:
Hello,
I have a Sam4s ER380 Regsiter and I am trying to get it to print to an Epson Tm-T88 kitchen printer. I am having no luck. I have setup the device, but can not get it to communicate with the printer at all.
Any suggestions?
Hmmn. I have never done that with a 380M but it can have a kitchen printer. If you did your programming correctly it is most often that cable that will keep it from working. It is not a off the shelf cable.
Double check your programming and then take a look at the cable and compare it to the pin outs for the cable. Whoever you bought your register from should be able to offer you that (maybe not for free) and always try and buy your kitchen printers from your register dealer because we can head off these problems before it is too late
hi i have 380m and ive set time and date but it does not change at can you help pls
If you have set it correctly and it does not change there could be something wrong with the register. We offer support for a fee if you need someone to walk you through it. SAM4s cash registers and support
Post a Comment