- Turn the mode lock key to the PGM position
- Press 2711 Press the . (Decimal Button)
- Press the @/For button
- Press 1 (for tax rate one, replace with tax rate you wish to program 1 - 4)
- Press the @/For Button
- Enter the Tax Rate 00.0000 (USE THE DECIMAL KEY. )
- Press the @/For Button
- Enter the lowest taxable amount. (In some states only amount above the minimum is taxable. So if in your state if anything over $0.50 is taxable you would enter 50, if everything over $0.01 is taxable enter 1)
- Press the Cash Key.
- Return the Mode Lock Key to the REG Position and test.
Here is an example of the keystrokes for programming tax rate 1 for 8.8% in the Sharp ER-A530 cash register with everything of $0.01 and up being taxable. Remember the key must be in program mode.2711 . @/for 1 @/For 8.8000 @/For 1 CashAnd again remember departments, PLU's,and/or UPC's must also be programmed to charge tax or not.
2 comments:
I also have an er-a530. The keys have been "re-positioned" and only the ones used have been programmed. Approximately 53. Now I have a couple of new items and would like to "activate" the rest of the keys. How do I do this? I ran an 1100 report and a 2119 report. Thank you.
Sorry, I don't have my manuals with me today as I'm snowed in at home. But are you sure the keys where moved or only programmed to not work. You should do a report that shows the status of each plu and see if they are set to inhibit or active. Also see if there is a report that shows key assignment. I'll post again when I'm able to get to mu office.
Post a Comment